Codex Plugin for Claude Code 2026 Review: Codex Inside Claude Code
· 9 min read

An official OpenAI plugin that runs Codex code reviews and delegated fixes inside Claude Code. Our beginner verdict on setup, cost and whether it is worth installing.

7.6 / 10

Codex Plugin for Claude Code 2026 Review: Codex Inside Claude Code

🛡️ AI Tool · Updated 2026

The Codex Plugin for Claude Code is an official OpenAI repository that lets you call Codex from inside Claude Code to review code or hand off tasks. One-line verdict: worth installing mainly if you already run both tools, because the plugin adds a second opinion without adding a second account. Setup friction and shared usage limits are the real cost.

How we tested

This review is desk research only. We read the plugin’s public repository and README, plus OpenAI’s Codex pricing page, and wrote up what the documentation says. There was no hands-on testing, no installed plugin, and no human testing in this pipeline. Treat every speed and quality impression as unverified until you try it yourself.

What follows describes what the tool claims to do, using sources collected on 2026-09-28.

What is the Codex plugin for Claude Code?

It is an official OpenAI plugin that turns Codex into a helper you can summon with slash commands from inside Claude Code. The plugin talks to your own local Codex CLI rather than a separate cloud runtime, so it uses the same install, the same local authentication and the same repository checkout you already have.

The repository describes itself plainly: “Use Codex from Claude Code to review code or delegate tasks” (Codex Plugin for Claude Code repo). It is written in TypeScript under the Apache-2.0 licence, version 1.0.3 was tagged in April 2026, and the repo has 33.7k stars. For beginners, the headline is simple: no new product to sign up for.

What you need before installing

You need Claude Code, a local Codex CLI install, Node.js 18.18 or later, and either a ChatGPT subscription — the Free tier counts — or an OpenAI API key, all laid out in the plugin README. Everything you run through the plugin contributes to your existing Codex usage limits, which are documented on the Codex pricing page.

The Codex pricing page is the one to bookmark, because there is no separate plugin bill. Practical check before you start: confirm node --version returns 18.18 or higher, and confirm Codex is already installed and signed in. If Codex is not there yet, the plugin can offer to install it during setup when npm is available, according to the plugin repository.

How to install the plugin

Installation runs entirely inside Claude Code as four slash commands, then a setup check. You also need Codex itself. Run the commands below in order, and don’t skip the reload — the plugin’s slash commands won’t appear until Claude Code picks it up.

/plugin marketplace add openai/codex-plugin-cc
/plugin install codex@openai-codex
/reload-plugins
/codex:setup

npm install -g @openai/codex
!codex login

The first four lines are typed inside Claude Code. The last two install Codex globally through npm and sign you in; the ! prefix runs a shell command from inside Claude Code. The install instructions in the README match this order. If the reload step is skipped, the /codex: commands simply will not exist yet.

/codex:review in plain English

This is a read-only review of your uncommitted changes, or of your branch against a base branch. Codex reads the diff and reports back; it cannot change files, you cannot steer it with custom focus text, and multi-file reviews can take a while, so the docs suggest running it in the background.

It accepts --base <ref> to pick the comparison branch, plus --wait and --background. A safe first run is /codex:review --background, then /codex:status to watch it, then /codex:result to read the output. Because it takes no focus text, think of it as a general second pass over your diff rather than a targeted question. The README is explicit that it is not steerable.

/codex:adversarial-review explained

This one is steerable: you can add focus text after the flags, and Codex will question your chosen approach, its tradeoffs, its failure modes and whether a simpler or safer design existed. It is still read-only and it does not fix anything. It is a design critique, not a security audit.

The docs suggest pointing it at risk areas such as auth, data loss, rollback, race conditions and reliability (plugin README). To be clear about what it is not: an adversarial review is not a substitute for human or professional security review, and there is no independent benchmark of how often it catches real problems versus raising noise. Treat its output as pressure-testing for your thinking, not certification.

/codex:rescue and delegating fixes

Rescue is the one that can change code. It hands a job to a subagent called codex:codex-rescue, which shows up in /agents: investigate a bug, attempt a fix, continue an earlier Codex task, or take a cheaper pass with a smaller model. Not read-only, so review the diff.

Flags include --background, --wait, --resume, --fresh, --model and --effort. Saying spark maps to gpt-5.3-codex-spark. Without --model or --effort, Codex picks its own defaults, according to the plugin documentation. A beginner-friendly habit: use --background for anything large, then read the diff before accepting it, because this command is the one place the plugin is allowed to edit your files.

Transfer, status, result, and cancel

Four housekeeping commands keep long jobs manageable. /codex:status lists running and recent Codex jobs for the current repo, /codex:result shows the stored output plus the Codex session ID, and /codex:cancel stops an active background job. /codex:transfer builds a persistent Codex thread from your Claude Code session.

Transfer has one quirk worth knowing: the source session must live under ~/.claude/projects, and it prints a codex resume <session-id> command you can paste into Codex directly (repo). Delegated tasks and stop-gate runs can be resumed the same way, which is how you keep a conversation going after leaving Claude Code.

The setup command and review gate

/codex:setup checks whether Codex is installed and signed in, and can offer to install it if npm is available. It also toggles the optional review gate: with --enable-review-gate, a Claude Code Stop hook runs a targeted Codex review of Claude’s answer and blocks the stop if problems are found.

That blocking behaviour is the part beginners underestimate. Disable it again with /codex:setup --disable-review-gate when you are in a hurry. The gate is a genuine safety net for sloppy output, but it also means Claude Code cannot finish until the flagged issues are addressed. Details are in the plugin README, and the trade-off is yours to pick.

What it costs and where your code goes

The plugin itself is free to install; there is no separate plugin subscription. What you actually spend is Codex usage, which counts against your existing ChatGPT or API Codex limits. Your code stays on your machine too: the plugin delegates through your local Codex CLI, app server and repository checkout, with no separate remote service or account.

Usage limits are explained on OpenAI’s Codex usage limits page. The plugin honours your existing Codex config — user-level ~/.codex/config.toml and project-level .codex/config.toml, where project settings only load when the project is trusted. The README example sets model = "gpt-5.4-mini" with model_reasoning_effort = "high", and setting openai_base_url points the built-in OpenAI provider somewhere else (repository).

Performance and common beginner slowdowns

The friction is mostly waiting, not crashing. Multi-file reviews can take a while, so background jobs plus /codex:status polling become the normal rhythm. The install chain has several links that can each break, and an enabled review gate can block Claude Code’s Stop, forcing extra rounds before you finish.

Practical tips from the docs: prefer --background over --wait on anything spanning multiple files, poll /codex:status rather than staring at a frozen prompt, and cancel with /codex:cancel when a job is going nowhere (README). If setup fails, check the chain in order — Node version, Codex installed, Codex signed in. No measured latency figures exist for this review; none were tested.

Alternatives to the plugin

If you do not want two agents in one terminal, you can run the Codex CLI on its own, use Claude Code’s built-in review behaviour, or try GitHub Copilot code review, Cursor BugBot, automated PR review bots, Aider or Gemini CLI. ToolBrain’s comparisons hub sorts these by workflow and price.

The full comparisons hub covers the broader field, and the AI coding assistant category groups the terminal-first tools. If you want background on the host app first, our tools directory and the blog archive are reasonable starting points before you commit to a two-agent setup.

Verdict, score, and who should install this

Our score is 7.6 out of 10. The plugin is a genuinely useful bridge if you already pay for Codex and live in Claude Code, and it is honest about being a thin local wrapper. It is not a hands-free reviewer, and we found no independent benchmark of its review quality.

DimensionScore
Overall Score7.6/10
Ease7.5/10
Features8.2/10
Performance7.0/10
Docs8.0/10
Support7.3/10

Buy it if you already use Claude Code and Codex, you want in-session reviews or delegated rescues without switching terminals, you are comfortable managing ~/.codex/config.toml, and you accept that every review draws on the same Codex usage limits you already have.

Skip it if you want standalone tooling, zero-setup installs, hands-free review, or guaranteed fixes. Skip it too if you need proof of review quality: there is no independent benchmark of /codex:review or the adversarial mode, and no false-positive data published anywhere we could verify. Support is also unverified — we cannot assess how actively OpenAI staff maintain the repo, how fast issues get closed, or how responsive the maintainers are.

The honest limitations list is short but real. Usage draws down Codex limits with no separate plugin billing. The dependency chain is local and multi-link, so a broken Node or Codex install blocks everything. The review gate can block Claude Code’s Stop hook until issues are resolved. And the whole thing rides on two accounts you may already be paying for — which is exactly why it works best for people who never left either tool. Compare it against the rest of the field in our comparisons hub and the AI coding assistant category before you install.

  • CodeIntel Log — code quality, debugging, and software engineering benchmarks
  • NoCode Insider — AI workflow automation with no-code tools, agents, and APIs
  • Hermes Tutorials — Hermes Agent setup, configuration, and advanced workflows

Cross-links automatically generated from None.

Back to all posts