What Fits in 16 GB VRAM? Local LLM Sizes, Quantization and Context (2026)
· 12 min read

What Fits in 16 GB VRAM? Local LLM Sizes, Quantization and Context (2026)

A practical walkthrough of the 16 GB VRAM tier: how weights, runtime overhead and the KV cache share a graphics card's memory, and what quantization and context length really cost.

Why this guide stays in one lane

Most “what can my GPU run” guides spread themselves across every memory tier and give each one a paragraph. This one does the opposite. It stays entirely inside the 16 GB tier — exemplified by cards like the RTX 5060 Ti and its 16 GB of GDDR7 GPU Monkey — because that tier has become a popular sweet spot for local large language models, and because the questions people actually ask about it, which model sizes fit, what quantization buys you, and how much context you can afford, need more than a paragraph each.

Two ground rules before we start. First, every verdict in this guide is an estimate built from listed download sizes plus a rough allowance for runtime overhead, and the KV cache at any stated context length is explicitly excluded from those estimates. Second, nothing here comes from hands-on testing. This is a documentation walkthrough, not a benchmark report, and it says so wherever it matters.

The card that defines the tier

The clearest example of a 16 GB card in 2026 is the GeForce RTX 5060 Ti, which carries 16 GB of GDDR7 memory on a 128-bit bus with 448 GB/s of memory bandwidth GPU Monkey. NVIDIA’s own family spec table lists the same configuration for the card — 16 GB of GDDR7 and 4,608 CUDA cores NVIDIA — and it confirms that both the RTX 5060 Ti and the RTX 5060 are Blackwell-architecture cards. A Notebookcheck spec listing reports the same pairing of 4,608 CUDA cores with 16 GB of GDDR7 Notebookcheck.

What this memory size means in practice

Sixteen gigabytes is a real but finite budget. It is enough to make the smaller model families in this guide realistic candidates for the tier — by estimate, as the sections below spell out — but it is not enough to be careless. Every byte the model touches during inference competes for the same pool: the weights, the runtime’s own overhead, and the growing cache of attention data. Understanding how those three parts share the budget is the whole game at this tier.

The three parts of the VRAM budget

Think of the memory pool as three envelopes rather than one.

The first envelope holds the model weights. This is the file you download, and its size is the closest thing to a hard floor for whether a model belongs in this tier at all.

The second envelope is overhead: the inference runtime, framework allocations, and miscellaneous working state. It is real, it varies between runtimes, and no source used in this guide puts a precise number on it, so we treat it as an unnamed allowance rather than a figure.

The third envelope is the KV cache. A KV cache stores the attention keys and values computed for earlier tokens so they are not recomputed Hugging Face KV cache docs. In other words, it reuses prior attention computations instead of repeating them during generation Hugging Face: how caching works. Without it, every new token would force the model to re-attend to the entire conversation so far, which is why the cache exists at all.

Why the KV cache is the wildcard

The KV cache is the part of the budget that punishes long conversations. Under the default DynamicCache strategy, the cache grows as generation progresses Hugging Face KV cache docs. A short prompt costs little; a long document-analysis session costs proportionally more, and the cost arrives token by token rather than up front. That behavior is why every fits-or-does-not-fit verdict in this guide carries the KV cache as an explicit exclusion.

The Transformers documentation also compares cache strategies by expected memory usage, and the contrast is worth a table:

Cache typeExpected memory usageSource
Quantized CacheLowHugging Face KV cache docs
DynamicCacheMediumHugging Face KV cache docs
StaticCacheHighHugging Face KV cache docs

The practical reading: DynamicCache grows as generation progresses, while StaticCache pre-allocates a specific maximum cache size Hugging Face KV cache docs. If your context needs are large and your memory is tight, a quantized cache is the documented low-memory option, while a static cache is the most memory-hungry because it reserves its maximum from the start.

What quantization does to the weight envelope

Quantization is the lever that moves models into this tier at all. It lowers the memory requirements of loading and using a model by storing the weights in a lower precision while trying to preserve as much accuracy as possible, taking weights from formats like fp16 or bf16 down to int8 or int4 Hugging Face quantization overview. The llama.cpp documentation describes the same idea from the file-size side: reducing the precision of model weights, for example from 32-bit floats to 4-bit integers, shrinks the model’s size llama.cpp quantize README.

The accuracy caveat you should not skip

Quantization is a trade, not a free lunch. It may introduce accuracy loss, which is usually measured as perplexity or Kullback–Leibler divergence, and that loss can be minimized by using a suitable imatrix file llama.cpp quantize README. In plain terms: a well-quantized model behaves close to its full-precision self, but “close” is doing work in that sentence, and the imatrix step is the documented way to keep the gap small.

What the libraries actually list

Ollama’s library pages list a download size and a context window for each model tag. Those two numbers are the raw material for every estimate in this guide, with one important warning attached: a download size is not a VRAM requirement. The file on disk tells you how big the weights are; it says nothing directly about overhead or the KV cache, which is why verdicts below are labelled as estimates.

Model tagListed download sizeListed context windowSource
llama3.1:8b4.9 GB128KOllama llama3.1
llama3.1:70b43 GB128KOllama llama3.1
llama3.1:405b243 GB128KOllama llama3.1
qwen3:4b2.5 GB256KOllama qwen3 tags
qwen3:8b5.2 GB40KOllama qwen3 tags
qwen3:14b9.3 GB40KOllama qwen3 tags
qwen3:30b19 GB256KOllama qwen3 tags
qwen3:32b20 GB40KOllama qwen3 tags
gemma3:4b3.4 GB128KOllama gemma3
gemma3:12b8.2 GB128KOllama gemma3
gemma3:27b17 GB128KOllama gemma3

One more honesty note on this table: the listings give sizes and context windows, but they do not tell us which quantization level each file corresponds to, and this guide will not guess. The sizes are treated exactly as listed — download sizes, nothing more.

What fits, as an estimate

With the budget split into weights, overhead and an excluded KV cache, the fits verdicts become simple arithmetic plus a caveat. A 4.9 GB weight file leaves roughly 11 GB of the 16 GB pool for everything else before overhead and context are counted Ollama llama3.1, and that margin is where the estimate lives. A fits verdict here means the listed weight file plus a rough overhead allowance sits inside the pool by estimate, with the KV cache excluded; it is not a claim that any model runs on this card with nothing offloaded to system RAM.

The comfortable end

  • qwen3:4b at 2.5 GB with a 256K listed context Ollama qwen3 tags — estimate: fits, with the largest weight-file margin of anything in the table.
  • gemma3:4b at 3.4 GB with a 128K listed context Ollama gemma3 — estimate: fits, with similar headroom.
  • llama3.1:8b at 4.9 GB with a 128K listed context Ollama llama3.1 — estimate: fits, with ample margin for overhead.
  • qwen3:8b at 5.2 GB with a 40K listed context Ollama qwen3 tags — estimate: fits, with room to spare.

The tight end

  • gemma3:12b at 8.2 GB with a 128K listed context Ollama gemma3 — estimate: fits for the weights plus overhead, but the remaining margin is thin enough that long contexts become the constraint, which is exactly the part excluded from this estimate.
  • qwen3:14b at 9.3 GB with a 40K listed context Ollama qwen3 tags — estimate: fits on the same basis, with the same thin-margin caveat once the KV cache starts growing.

For both rows in the tight end, the honest summary is this: the weight file and a reasonable overhead allowance sit inside the pool by estimate, while the KV cache at the full listed context length is excluded from that verdict and can change the picture at long context.

What does not fit

The other side of the ledger is simpler, because these verdicts need almost no arithmetic.

  • gemma3:27b at 17 GB with a 128K listed context Ollama gemma3 — estimate: does not fit; the weight file alone exceeds the entire 16 GB pool GPU Monkey.
  • qwen3:30b at 19 GB with a 256K listed context Ollama qwen3 tags — estimate: does not fit, for the same reason.
  • qwen3:32b at 20 GB with a 40K listed context Ollama qwen3 tags — estimate: does not fit.
  • llama3.1:70b at 43 GB with a 128K listed context Ollama llama3.1 — estimate: does not fit, and not closely.
  • llama3.1:405b at 243 GB with a 128K listed context Ollama llama3.1 — estimate: does not fit; this file sits far beyond the tier.

For every row above, the only realistic path to running them at this tier is offloading weights to system memory, which trades memory pressure for speed — a trade this guide makes no claims about, since no speed figures were established for it.

Context window and model size are independent

One pattern in the table deserves its own heading. The qwen3:4b listing pairs a 2.5 GB file with a 256K context window, while the larger qwen3:8b file at 5.2 GB is listed with a 40K window Ollama qwen3 tags. A bigger model does not mean a bigger context window, and a bigger context window does not mean a bigger file. The two numbers describe different things — one describes the weights, the other describes a supported sequence length — and budgeting for them is separate work.

Frequently asked questions

What does the KV cache actually store?

It stores the attention keys and values computed for tokens that have already been processed, so those calculations do not have to be recomputed Hugging Face KV cache docs. It exists to reuse prior attention computations instead of repeating them during generation Hugging Face: how caching works, and under the default dynamic strategy it grows as generation progresses Hugging Face KV cache docs.

Does quantization damage a model?

It can. Quantization reduces weight precision, which shrinks the model’s size, but it may introduce accuracy loss that is usually measured as perplexity or Kullback–Leibler divergence; using a suitable imatrix file minimizes that loss llama.cpp quantize README. The documented goal is to lower memory while preserving as much accuracy as possible Hugging Face quantization overview.

Does a larger listed context window mean a larger download?

No. The qwen3 listings show a 4B model at 2.5 GB with a 256K window and an 8B model at 5.2 GB with a 40K window Ollama qwen3 tags. Context window and file size move independently, so neither one predicts the other.

Which cache strategy should a user at this tier prefer?

The documentation ranks expected memory usage as Low for a quantized cache, Medium for the dynamic cache, and High for the static cache, which pre-allocates its maximum size Hugging Face KV cache docs. On a tight memory budget, that ranking points toward the quantized option — though this guide did not test any of them.

The Bottom Line

The 16 GB tier GPU Monkey, by estimate, is the home of the 4B to 14B class of models as they appear in the listings above: files of 2.5 GB, 3.4 GB, 4.9 GB, 5.2 GB, 8.2 GB and 9.3 GB all leave room for weights plus overhead inside the pool, with the KV cache at any stated context length excluded from that verdict Ollama llama3.1 Ollama qwen3 tags Ollama gemma3. Everything listed at 17 GB and above — the 27B, 30B, 32B, 70B and 405B entries — does not fit by estimate, because the weight files alone meet or exceed the entire pool Ollama llama3.1 Ollama qwen3 tags Ollama gemma3. Treat every fits and does-not-fit statement in this guide as what it is: an estimate from listed sizes plus overhead, not a measurement, and not a promise about any particular runtime.

How This Guide Was Built

This guide was built entirely from documentation and library listings: graphics card specification pages, the Hugging Face Transformers documentation on KV caches and quantization, the llama.cpp quantization README, and the Ollama library pages for llama3.1, qwen3 and gemma3. The author did not run any model hands-on, did not measure tokens per second, did not measure VRAM at any context length on hardware, and did not check prices. Every fits and does-not-fit statement is labelled as an estimate derived from listed download sizes plus an unquantified overhead allowance, with the KV cache at the stated context length excluded. Where a source could not be verified — one major spec database was inaccessible during research — it was left out entirely rather than guessed at.

  • ToolBrain — tool reviews, LLM comparisons, and AI workflow guides
  • CodeIntel Log — code quality, debugging, and software engineering benchmarks

Cross-links automatically generated from None.

Back to all posts